Type MSL Manganic Sand Filter

Description
The MSL manganic sand filter specioally designed for the purpose of remord the iron and manganicion in water. the aeration catalytic oxidation process will make the Fe2+ to Fe3+ by the jeta fitted on pump outlet suck air and more Fe3+ will be absorbed by sand so the water quality meets requirement.

Characteristics
Aeration process need it medicament added.
Speed removal performance depend on the active filter film
on the magnetic surface.
No motion parts, operating conveniently.
Low operation consumption and low cost.
Smallerize than nature aeration.

Applications
Water works refine filtrate.
Oil field injection water.
Other system water be demand to reduce iron and magnetic ion.

Type indications
MSL 800
800--Dia (mm)
MSL--Code of type

Technical performance

Basal data
The following informations should be offered by user:
a.Iron, Manganic carbon dioxide and silicon dioxide content in water, the PH value, water temperature, chroma and basicity should be offered.
b.The require ment copacity of unit.
c.Water quality afer treatment.

Basal data
a.Intet Fe2+≤6mg/L. outlet Fe2+<0.3mg/L. the following process shall be applged.

b.Inlet Mn2+≤1.5mg/L. Oulet Mn2+<0.1mg/L. the following process shall be qpplied:

c Inlet Fe2+=2mg/L. Mn2+=1mg/L
Outlet Fe2+<0.3mg/L Mn2+=0.1mg/L the following process ahall be applied.

d.Inlet Fe2+>2mg/L Mn2+>1mg/L or Fe2+>10mg/L Mn2+>1.5mg/L
Outlet Fe2+<0.3mg/L Mn2+<0.1mg/L the following process shall be applied: